BRAND NEW GENUINE NISSAN SHORT MOTOR FOR NISSAN VG30DETT

PRICE: $5990.00

SUPER TECH HIGH PERFORMANCE RACING VALVES

5mm oversized  stainless inlet and Inconel exhaust.

High flow rates, durability and quality.

FOR MORE INFO: www.supertechperformance.com

PRICE: $950/SET

SUPERTECH DUAL HI PERFORMANCE VALVE SPRINGS

PRICE:
$545.00 FULL SET

UAS CAMS

THESE CAMS ARE MADE FROM NISMO BLANKS (NOT REGRINDS) PARKERIZED COATING 272 DURATION STOCK IS 240 DURATION 9.5MM LIFT (STOCK 8.5MM LIFT) REQUIRES CLEARANCE IN HEAD AND REQUIRE STRONGER VALVE SPRINGS. SUIT TT OR NA

PRICE: $1795.00

NEW GENUINE NISSAN 300ZX TWIN TURBO ENGINE WIRING HARNESS

SUIT MANUAL OR AUTO

PLAZMAMAN POLISHED ALLOY POWER STEERING RESERVOIR

COMES WITH EARLS ALLOY MOTORSPORT FITTINGS

AVAILABLE FOR 300ZX TWIN TURBO AND N/A

SPLITFIRE SUPER DIRECT IGNITION COILS FOR NISSAN 300ZX (Z32)

INCREASES POWER AND TORQUE. SUPPRESSES VOLTAGE DROP DOWN OF SECRONDARY IGNITION. DECREASES RATIO OF INCOMPLETE COMBUSTION EVENTS & IMPROVES FUEL ECONOMY.

BY INCREASING THE NUMBER OF WINDINGS OF THE COIL-ON-PLUG SYSTEM, THE SPLITFIRE SUPER DIRECT IGNITION GENERATES HIGHER AND MORE STABLE VOLTAGE TO EACH SPARK PLUG WITHOUT DECREASING THE VOLTAGE AT HIGH RPM'S

$695.00

POWER TRANSISTOR UNIT (PTU) TYPE 2 (90-96 Z32) FOR TWIN TURBO AND N/A.

THE EARLY MODEL (89-3/94) PTU WAS PRONE TO FAILURE AND WAS SUPERSEDED WITH A NEW DESIGN WHICH WAS FACTORY INSTALLED ON ALL 300ZX'S FROM 4/94 ONWARDS.

PRICE: $450.00

GATES TIMING BELT

• 3 TIMES STRONGER THAN A NORMAL TIMING BELT
• 3 TIMES MORE HEAT RESISTANCE
• 3 TIMES MORE TOOTH STRENGTH THAN FACTORY

SUITABLE FOR VG30DETT & VG30DE

PRICE: $29.00 PER SET

FACTORY HYDRAULIC LIFTERS FOR NISSAN 300ZX

SUIT VG30DETT & VG30DE

PLEASE EMAIL US TO CORRECTLY MATCH CAMSHAFT SPECS

MANUFACTURED USING 4340 AIRCRAFT GRAGE CHROME MOLLY STEEL

MUCH LIGHTER THAN FACTORY CONRODS FOR LESS ROTATING MASS, SO THEREFORE LESS LAG AND FASTER REVVING.

FEATURES:

• PROFILED DESIGN
• ARP 2000 ROD BOLTS INCLUDED
• SPECIAL DOWELED CAP FOR SPECIFIC CAP-TO-ROD ALIGNMENT
• PRECISION SIZED TO THE TIGHTEST SPECIFICATIONS
• BALANCED TO +/- 1 GRAM AT SCAT
• RATED AT 180HP PLUS PER ROD

ARGO HEAVY DUTY CONRODS WITH A WEIGHT OF ONLY 625 GRAMS EACH COMPARED WITH THE FACTORY WEIGHT OF 716 GRAMS

ACL/ROSS RACING PISTONS

PERFECT FOR HIGH PERFORMANCE ROAD OR RACE USE

THESE PISTONS FEATURE:

• CHAMFERED PORTS AND EDGES
• LOW SILICON CONTENT FOR ADDED STRENGTH
• THICK AND STRONG SKIRTS
• QUALITY GAS NITRIDED STEEL RINGS WITHOUT THE FANCY COATINGS THAT TEND TO WEAR OFF WITH HEAT
• PROVEN RELIABILITY FOR HIGH BOOST AND HIGH HEAT TURBO RACE MOTORS
• EXCEPTIONAL QUALITY

AVAILABLE IN 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED

FULLY MACHINED CROWNS INCLUDE VALVE RECESSES READY TO GO

COMES AS SET OF 6 WITH RINGS

VG30DETT 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED WITH RINGS AND PINS

SLIGHTLY BORED OUT. ROUGH CASTING IS SMOOTHED OVER.

IDEAL FOR THE MODIFIED 300ZX

PRICE: $780.00 EXCHANGE

PRICE: $950.00 OUTRIGHT

PRICE: $550.00 EXCHANGE

PRICE: $650.00 OUTRIGHT

PRICE: $90.00 EACH EXCHANGE

UAS BORED THROTTLE BODIES ARE 53MM (NB HOUSING ONLY) COMPARED WITH 50MM FOR THR STANDARD UNIT. UAS THROTTLE BODY INCLUDES A LARGER BUTTERFLY TO SUIT.

ALSO AVAILABLE IN A 55MM UNIT INCLUDING REPLACEMENT SHAFE AND BEARINGS WITH LARGER BUTTERFLY

NOTE: PRICES ARE EXCHANGE ONLY. ADDITIONAL $40.00 EACH IF PURCHASED OUTRIGHT.

PRICE: $240.00 53MM EACH

PRICE: $280.00 55MM

THESE GASKETS REDUCE THE AMOUNT OF HEAT SOAK INTO THE PLENUM, RESULTING IN LOWER INTAKE TEMPS, IMPROVED RELIABILITY AND INCREASED PERFORMANCE

COMETIC VG30DETT MULTI SHIM METAL HEAD GASKET

AVAILABLE FROM 45 THOU - 1.43MM THICK

PERFECT FOR HIGH HORSEPOWER APPLICATIONS

SAME SIZE AS FACTORY PULLEY BUT WEIGHTS IN AT ONLY 1738 GRAMS COMPARED TO THE 6KG FACTORY PULLEY.

TO SUIT 300ZX VG30DETT. INCLUDES ADJUSTABLE TENSIONER. INCREASES WRAP ANGLE FOR CAM SPROKET, HELPS STOP BELT FROM JUMPING AND SLOWS DOWN PULLEY BEARINGS. THIS ENSURES THAT THE BEARINGS ARENT SPINNING AS FAST AND ARE MORE SECURE, SO THEY WONT FAIL OR FALL APART AT HI RPM IN HEAVILY MODIFIED ENGINES.

KIT INCLUDES CUSTOM MOUNTING BRACKET FOR ADJUSTABLE PULLEY AND NEW BEARINGS

AROUND 1/8TH THE WEIGHT OF THE FACTORY ITEM AT 802 GRAMS

NOTE: REQUIRES ADDITIONAL DRIVE BELT SET ($75.00)

ULTRA STREET SET OF LIGHTENED UNDERDRIVE PULLEYS.

GREDDY OVERSIZED PULLEY KIT FOR NISSAN 300ZX TWIN TURBO OR NA

GREDDY WATER PUMP, ALT AND POWER STEERING PULLEYS MADE FROM DURALUMIN (A2017) ANNODISED BLUE. LESS THAN HALF THE WEIGHT OF FACTORY STEEL ONES FOR IMPROVED THROTTLE RESPONSE.

SUITABLE FOR VG30DE AND VG30DETT

NOTE: SERIES I & II USE A DIFFERENT INLET CAM GEAR

PRICE: $390.00.00 (INLET - SERIES I)

PRICE: $330.00.00 (INLET - SERIES II)

PRICE: $295.00.00 (EXHAUST)

SLIGHTY UNDER DRIVEN AND 4.57KG AND ALSO ANDRA APPROVED

INCLUDES RUBBER SEAL

INCLUDES SANDWICH BLOCK, HOSES, FITTINGS & OIL COOLER

USES 19 ROW -10 OIL COOLER WITH BRAIDED LINES

19 X 10 ROW - OIL COOLER ONLY

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

KIT INCLUDES TANK, CLAMPS AND HOSES

PRICE INCLUDES FITTING OF ALLOY PLATE, TRANSMISSION COOLER, MESH HOSES & CLAMPS.

UAS FULL SIZE RADIATOR AIR GUIDE FOR NISSAN 300ZX

GREAT LOOKING AND FUNCTIONAL AIR GUIDE DESIGNED FOR Z32 TWIN TURBO BUT CAN BE EASILY ADAPTED TO FIT THE N/A MODEL.

MADE FROM LASERCUT 1.2MM ALLOY, THESE PREVENT AIR FROM GOING OVER THE RADIATOR, FORCING MORE AIR THROUGH THE CONDENSER AND RADIATIOR FOR BETTER COOLING.

OPTIONAL ANNODISED RED OR BLUE FINISH

PRICE: $140.00

PRICE: $225.00 ANNODISED

DESIGNED TO INCREASE AIR FLOW THROUGH YOUR RADIATOR

AVAILABLE IN CARBON OR FIBREGLASS FOR TWIN TURBO AND N/A 300ZX

PRICE: $95.00 FIBREGLASS

PRICE: $150.00 CARBON FIBRE

DESIGNED TO INCREASE AIR FLOW THROUGH YOUR RADIATOR

AVAILABLE IN STAINLESS OR ALLOY.

PRICE: $65.00 STAINLESS

PRICE: $50.00 ALLOY

THICKER RADIATOR THAN STANDARD. USES 29MM CORE WITH PLASTIC END TANKS. FACTORY CORE THICKNESS IS 25MM

A SENSIBLE UPGRADE FOR YOUR 300ZX

UAS TWIN PASS RADIATOR FOR NISSAN 300ZX

USES QUALITY PWR 42MM SINGLE CORE, UP 10% MORE EFFICIENT THAN THE EARLIER 40MM CORE. COMES WITH ALLOY TOP BLEED SCREW.

OR 55MM WIN CORE  $895

HAS MOUNTING BRACKETS FOR THERMO FAN AND FACTORY FAN SHROUD, OPTIONAL SPAL 16 INCH THERMO FAN CURVED BLADE   $270.00

FOR MORE INFORMATION - CLICK HERE

http://www.pwr.com.au/story7.html

PIC SHOWS THE RADIATOR WITH MOUNTING BRACKETS FOR THE THERMO FAN. ALSO HAS FITTING OFR THE TEMP ACTIVATED SWITCH

NOTE:

SUITABLE FOR MANUAL VEHICLES ONLY. WE RECOMMEND USING AN EXTERNAL OIL COOLER ON AUTOMATIC VEHICLES.

We also do a twin pass twin core 55mm radaitor with heat exchanger built in $1295

UAS LOWER RADIATOR PIPE FOR NISSAN 300ZX

NOW IN LIGHTWEIGHT ALLOY

SUITABLE FOR N/A AND TWIN TURBO 300ZX. IDEAL REPLACEMENT FOR FACTORY PIPE WHICH GETS OLD AND SOFTENS.

2 PEICE SET IN RED OR BLUE

STRONGER THAN FACTORY

AVAILABLE IN 500 - 850CC

SUIT VG30DETT

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $210.00 (EACH)

AVAILABLE IN 555 OR 740 CC TO SUIT

7/89 - 10/94 (555CC ONLY)

10/94 - 10/98 (555 OR 740CC)

PRICE: $230.00 EACH (94-98)

PRICE: $230.00 EACH (89-94)

BOSCH 044 FUEL PUMP

CAN SUPPORT UP TO 700HP

EXTERNAL PUMP

PRICE: $355.00

SPECIAL: $295.00 (LIMITED ONLY)

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

THESE MANIFOLDS ARE OPENED UP LARGER INSIDE FOR MUCH NEEDED INCREASE IN AIR FLOW VOLUME WITH A SMOOTHER FINISH FOR LESS RESISTANCE - THIS IS PROVEN WITH OUR BENCH TEST.

AT 25 INCH OF MERCURY AS TESTED ON FLOW BENCH

TESTING EACH RUNNER

OPTIONAL HIGH TEMP HPC COATING AVAILABLE FOR AN EXTRA $350.00 PER PAIR AS PER IMAGES

PRICE: $595.00 PAIR EXCHANGE

TNA

NEW 2 VOLUME SERVICE MANUAL

NEW NISSAN CRANK ANGLE SENSOR

SUITS 300ZX NA & TT ENGINES

PRICE: $450.00

NEW NISSAN STARTER MOTOR

PRICE: $350.00