Backed by Turbosmart’s reputation for high-end, race-quality products, the 300ZX BOV Adapter Kit consists of 2 Turbosmart Vee Port blow-off valves, polished aluminium piping and blanking plugs, silicone joiners, all hoses and clamps. All the parts are designed and made by Turbosmart, so the quality and fit are guaranteed.  Replaces factory throttle body intake hoses.
Don’t waste your money on cheap knock-offs and risk the well-being of your car!
Invest in quality and enjoy the benefits!
The KIT comes with full detailed fitting instructions (3MB PDF) ,including disabling factory BOV’s.

PRICE: $995.00

UAS PLAZMAMAN INTERCOOLER KIT FOR NISSAN 300ZX

HIGH QUALITY EFFICIENT USA MADE CORE WITH FIN TUBULATORS, TAPERED POLISHED END TANKS, MANDREL BENT POLISHED PIPES, SILICON HOSES AND CLAMPS

KIT PRICE: $1,895.00

UAS FRONT MOUNT INTERCOOLER KIT FOR NISSAN 300ZX

90MM THICK BAR & PLATE INTERCOOLER WITH POLISHED END TANKS, POLISHED ALLOY MANDREL BENT PIPEWORK AND ALL HOSES & CLAMPS REQUIRED FOR FITMENT.

ALSO AVAILABLE IN A SQUARE TUBE & FIN 75MM CORE WITH 90MM END TANKS

90MM KIT PRICE: $1,995.00

75MM KIT PRICE: $1,695.00

FULL BOLT ON KIT. USES TWIN IN TWIN OUT MONSTER POLISHED INTERCOOLER. KIT INCLUDES ALL NESSESARY CLAMPS AND HOSES READY TO GO. FITS FACTORY FRONT BAR

SIZE: 600 X 300 X 120MM

TUBE AND FIN INTERCOOLER KIT FOR NISSAN 300ZX VG30DETT. COMPLETE KIT INCLUDING PIPING, HOSES AND FITTINGS.

TUBE AND FIN CORE - 500 X 200 X 76

PRICE: $750.00

NEW TECHNOLOGY, EFFICIENT & LIGHTWEIGHT SQUARE TUBE & FIN CORE.

3 TIMES THE VOLUME OF STANDARD 300ZX INTERCOOLERS, BOLTS STRAIGHT ON IN FACTORY LOCATION AND USES THE FACTORY INTERCOOLER PIPING.

CORE SIZE: 200 X 290 X 90MM

ONE PEICE POLISHED ALLOY PIPE KIT

INCLUDES SILICON HOSES IN BLUE, RED, BLACK OR YELLOW, AND QUALITY STAINLESS BOLT TYPE HOSE CLAMPS.

D.I.Y FITMENT - BLACK ANNODISED OPTION ALSO AVAILABLE

PRICE: $440.00 POLISHED

PRICE: $540.00 ANNODISED BLACK

KIT USES A 100MM CAST ALLOY POLISHED ADAPTER FOR RAM POD WITH TAPPED HOLES TO BOLT DIRECTORY INTO THE AIR FLOW METER. DUAL CONE RAM POD IS INCLUDED, ALONG WITH POLISHED ALLOY PIPES, SILICON HOSES,BOLTS, CLAMPS & EVERYTHING REQUIRED FOR FITMENT.

CAN BE PURCHASED WITH OR WITHOUT RAM POD & ADAPTER

PRICE: $295.00 WITH RAM POD

PRICE: $195.00 WITHOUT RAM POD

2 PIECE KIT.

AVAILABLE IN RED OR BLUE

OPTIONAL BLUE, RED, YELLOW, or BLACK SILICON HOSES

PRICE: $455.00

UAS CUSTOM GT28RS TURBO KIT FOR NISSAN 300ZX TWIN TURBO

FULL TURBO KIT CAPABLE OF FLOWING BETWEEN 340 AND 450RWKW

CLICK HERE TO VIEW DYNO READING FOR THIS KIT

COMPLETE GASKET KIT INCLUDED.

• EXHAUST: 0.64 A/R
• COMPRESSOR: 0.60 A/R
• REQUIRES 5 BOLT FLANGE DUMP PIPES TO SUIT

• TURBINE HSG: 0.54 A/R
• COMPRESSOR HSG: 0.48 A/R
• COMPRESSOR FLOW: 31lb/MIN
• COMPRESSOR WHEEL: INDUCER 46.5MM / EXDUCER 60MM
• TURBINE WHEEL: 41.5 MM EXDUCER/ 53.85MM INDUCER
• WATER COOLED CENTRE HSG
• BALL BEARING

ONLY MODIFICATION REQUIRED IS THE OIL DRAIN BOLT HOLE CENTRES

• TURBINE HSG: 0.54 A/R
• COMPRESSOR HSG: 0.48 A/R
• COMPRESSOR FLOW: 33lb/MIN
• COMPRESSOR WHEEL: INDUCER 47.75MM / EXDUCER 60MM
• TURBINE WHEEL: 41.5 MM EXDUCER/ 53.85MM INDUCER
• DIFFERENT ANGLE ON IMPELLER BLADES TO 300HP UNIT
• WATER COOLED CENTRE HSG
• BALL BEARING

ONLY MODIFICATION REQUIRED IS THE OIL DRAIN BOLT HOLE CENTRE.

UAS ZED GT28 TURBO KIT

COMPLETE WITH ACTUATORS, BRACKETS, OIL FEEDS AND SILICON HOSES TO BOLT STRAIGHT ON. TURBO KIT COMES IN TWO SIZES:

• TWIN 320BHP TURBOS, GOOD FOR 300 TO 400RWKW
• TWIN 400BHP TURBOS, GOOD FOR OVER 400RWKW

REQUIRES UAS 5 BOLT DUMP AND ENGINE PIPES, 2.5 INCH NON-TURBULENCE TYPE.

SUITABLE FOR VG30DETT & VG30DE

PRICE: $395.00 EACH

USES TWIN K & N AIR FILTERS. PERFECT FOR 300ZX'S FITTED WITH FRONT MOUNT INTERCOOLERS

NOTE: AIR FILTERS $85.00 EACH

AIRBOX PRICE: $370.00

FILTER PRICE: $85.00

BOLT ON KIT

APEXI POWER INTAKE POD FILTER

KIT TO SUIT 300ZX TWIN TURBO