STOPTECH AERO ROTORS - 2 PIECE 72 CURVED VANE FLOATING - SUITS GTR V-SPEC FRONT ROTORS, 350Z FRONT & REAR ROTORS, EVOLUTION LANCER FRONT ROTORS & SUBARU STI FRONT ROTORS

THE STOPTECH AEROROTOR KITS ARE DESIGNED TO REPLACE STANDARD ONE PIECE ROTORS AND WORK WITH THE OE CALIPERS. KITS INCLUDE 2-PIECE DIRECTIONAL FLOATING ROTORS WITH DIRECTIONAL BILLET ALUMINIUM AEROHATS. THE PRE-ASSEMBLED FLOATING 2-PIECE ROTORS ALLOW EXPANSION WITHOUT THE DISC CONING. THE KITS ARE UP TO 3.5KGS LIGHTER THAN STOCK ROTORS AND PUSH UP TO 61% MORE AIR FOR BETTER COOLING AND REDUCED FADE ON THE TRACK.

STOPTECH HAS INCORPORATED SEVERAL DESIGN INNOVATIONS TO IMPROVE ROTOR AIRFLOW, COOLING AND HEAT CAPACITY. THE ABILITY TO ABSORB AND DISSIPATE HEAT IS ESSENTIAL TO BRAKING SYSTEM PERFORMANCE. THE UNIQUELY DESIGNED VANES INSIDE THE DISC OPTIMIZE AIRFLOW THROUGH THE ROTOR. THIS IMPROVED DIRECTIONAL DESIGN MINIMIZES TURBULENCE AND FLOWS MORE AIR THAN ANY OTHER ROTOR TESTED. BETTER AIRFLOW MEANS BETTER COOLING AND LESS FADE.

AEROROTOR® VANE DESIGN OFFERS THE BEST AIRFLOW AND COOLING OF ANY VENTED ROTOR. ALL OF OUR ROTORS ARE HEAT TREATED, PRECISION GROUND, SLOTTED OR DRILLED AND BALANCED AT THE FOUNDRY. THE STOP TECH INTERNAL VANE DESIGN WHICH OFFERS BETTER COOLING AS WELL AS THE IRON FORMULATION IS EXTREMELY RESISTANT TO CRACKING.

AEROHATTM DIRECTIONAL BILLET HATS (SECOND PICTURE ON LEFT) - A RACING FIRST

PRICE: $1,220.00 PAIR

NEAR NEW PORSCHE 996 GT3 CUP ( BREMBO ) CALIPERS

ONE PIECE MONO BLOC, 6 DIFFERENTIAL PISTONS WITH ZERCON OXIDE PISTON CAPS TO PREVENT HEAT SOAK, FERODO 3000 PADS, ALCON CRESENT SLOTTED TWO PIECE ROTORS WITH HARD ANODISED FLOATING HAT, NO KNOCK OFF OR RATTLES, BILLET ALLOY CALLIPER, AIR DEFLECTORS, ALL NEAR NEW CONDITION

PRICE: $3,950.00

ALCON BIG BRAKE KIT

KIT INCLUDES:

• 365MM TWO PIECE ROTORS WITH FISH HOOK SLOTS
• 6 DIFFERENTIAL PISTON CALIPERS
• HARD ANODISED HATS
• CAP BOLTS
• BILLET ALLOY CALIPER ADAPTERS
• FERODO DS2500 BRAKE PADS
• BRAKE FLUID

SUITABLE FOR SKYLINE GTS-T & GTR, 300ZX, 200SX AND SUPRA

Click here for more info

PRICE: $4,900.00

FISH HOOK OR NORMAL SLOTTED ROTORS 335MM, ALLOY HATS, ADAPTERS BOLTS ETC. FERODO DS2500 PADS

PRICE: $3,495.00

UAS 343MM BIG BRAKE KIT

KIT INCLUDES:

• 343MM SLOTTED TWO PIECE ALLOY ROTORS
• HATS
• BILLET ALLOY CALIPER ADAPTERS TO SUIT FACTORY CALIPERS
• CAP BOLTS
• CUSTOM FERODO 2500 PADS
• OPTIONAL DS3000 PADS EXTRA $100

AVAILABLE FOR GTR / GTS-T / SILVIA / 300ZX

PRICE: $1,495.00

UAS GT3, 6 PISTON BIG BRAKE KIT

KIT INCLUDES:

• PORSCHE 6 DIFFERENTIAL PISTON LIGHTWEIGHT MONOBLOCK GT3 CALIPERS AS USED IN THE CARRERA CUP.
• 350 OR 365MM TWO PIECE ROTORS, CALIPER ADAPTERS, CAP BOLTS AND BRAIDED BRAKE LINES.
• OPTIONAL TRIPLE HEAT TREATMENT OF ROTORS ALSO AVAILABLE FOR AN EXTRA $150.00

PRICE: $4700.00

CROSS DRILLED & SLOTTED ROTORS. THESE ROTORS ARE HEAT TREATED WITH THERMO PAINT INDICATORS.
CLICK HERE FOR MORE INFORMATION

OPTION DBA 5000 SERIES TWO PIECE BRAKE ROTORS AVAILABLE
FOR AN ADDITIONAL $450
COLOUR OPTIONS FOR HAT - SILVER, RED, BLUE, BALCK OR GOLD
CLICK HERE FOR MORE INFORMATION

SLOTTED PRICE: $490.00 PAIR

DRILLED/SLOTTED PRICE: $590.00 PAIR

KIT USES AP RACING 6-PISTON CALIPERS AND 365 X 34MM TWO PIECE ANNODISED HATS WITH SLOTTED STEEL ROTORS, CALIPER ADAPTERS, SBS ROAD/RACE BRAKE PADS AND BRAIDED LINES

SUIT R32, R33 & R34 GTR

BOLT ON KIT INCLUDING 330MM SLOTTED & VENTED DISC ROTORS. STANDARD ROTORS ARE 296MM. KIT ALSO INCLUDES ADAPTERS AND HIGH TENSILE CAP BOLTS TO SUIT FACTORY CALIPERS

FRONT UPGRADE KIT - INCLUDES 324MM DBA 4000 SERIES HEAT TREATED & SLOTTED ROTORS, BILLET STEEL ADAPTERS & HIGH TENSILE GRADE 12 ALLEN KEY BOLTS UTILIZING THE FACTORY CALIPERS.

NOTE: FACTORY ROTORS ARE 280MM

CLICK HERE FOR MORE INFORMATION

• 343MM 2 PIECE SLOTTED ROTORS WITH FLOATING ALLOY HATS
• 4 PISTON AP RACING CALIPERS
• BRAIDED BRAKE LINES
• SBS HIGH PERFORMANCE PADS
• BILLET ALLOY ADAPTERS WITH HELLI COILS
• HIGH TENSILE CAP BOLTS
• SPRUNG STEEL SCHNORR LOCKING WASHERS
• BOLT ON KIT
• 18 INCH WHEELS REQUIRED

KIT USES AP RACING 6 POT DIFFERENTIAL CALIPERS WITH CALIPER ADAPTERS, 365 X 32MM SLOTTED ANNODISED ROTORS, ADAPTERS, & RCE3 BRAKE PADS.

KIT ALSO INCLUDES BRAIDED LINES

NOTE: CAR MUST HAVE AT LEAST 18' WHEELS TO ACCOMODATE ROTORS

FRONT & REAR SLOTTED ROTORS

FRONT CROSS DRILLED & SLOTTED ALSO AVAILABLE

FRONT SLOTTED PRICE: $195.00 EACH

REAR SLOTTED PRICE: $245.00 EACH

DRILLED & SLOTTED PRICE: $225.00 EACH

HIGHLY POLISHED 316 GRADE STAINLESS STEEL WITH STAINLESS ALLEN KEY BOLTS & FITTING INSTRUCTIONS

MASTER CYLINDER SUPPORT FOR NISSAN 300ZX. TIG WELDED AND COATDED.

PREVENTS FIREWALL FLEX FOR MORE RESPONSIVE BRAKING

GOODRIDGE BRAIDED BRAKE LINES
FOR SKYLINE GTR, PULSAR GTiR AND S13,14,15

ADR APPROVED BRAIDED STAINLESS STEEL BRAIDED BRAKE LINES..IMPROVED BRAKE PEDAL RESPONSE AND FEEL.

COMES WITH ADAPTERS AND RCE BRAKE PADS.

USES 330MM X 28MM ROTORS

FISH HOOK SLOTS, HEAT TREATED THERMO PAINT INDICATORS, TWO PIECE ROTOR ASSEMIBLY. SUITS R33 & R34 GTR'S & NISSANS WITH UAS STAGE ONE BRAKE UPGRADE KIT. (LIMITED RUN FROM DBA)

MINTEX BRAKE PADS ARE MADE OF M1155, WHICH IS A LOW MEDIUM METALLIC MATERIAL COMBINING A BLEND OF FERROUS AND NON-FERROUS METALS WITH A HIGH TEMPERATURE ABRASIVE AND LUBRICANT SYSTEM. ITS UNIQUE FORMULATION ENABLES USE AT HIGH TEMPERATURES WITHOUT ANY SPECIAL BEDDING PROCEDURES. THE M1155 MATERIAL BRAKE PADS CONTAIN NO ASBESTOS.

THE M1155 IS A MODERN LIGHTWEIGHT COMPOUND WITH SLIGHTLY LOWER FRICTION (TORQUE) THAN THE M1144 MATERIAL, BUT OPERATES AT HIGHER TEMPERATURES. LIKE THE M1144 MATERIAL BRAKE PADS THERE IS NO NEED TO CHANGE YOUR BRAKE PADS FOR TRACK OR CIRCUIT DAYS.

FEATURES INCLUDE:

• POSITIVE BRAKE WITH MEDIUM FRICTION (TORQUE) LEVEL,
• EXCELLENT COLD FRICTION - SUITABLE FOR BOTH ROAD AND TRACK USE - NO NEED TO CHANGE PADS,
• LOW DUST - MAYBE SLIGHTLY NOISIER THAN THE M1144 MATERIAL BRAKE PADS,
• NO ASBESTOS - NO HEAVY METALS,
• OPERATES UP TO 700 C (1300 F) WITHOUT FADE,
• NOMINAL MU (TORQUE) 0.42.

DS2500 IS THE LATEST PAD COMPOUND DEVELOPED BY FERODO. IT IS AN EXCELLENT HIGH PERFORMANCE ROAD COMPOUND, AND IS SUITABLE FOR MANY CLUB RACING AND RALLY APPLICATIONS. IT IS EASY TO BED AND OFFERS EXCELLENT BRAKING WITH A HIGH LEVEL OF CONTROLABILITY, AND IS ECONOMICALLY PRICED.

IDEAL FOR HIGH PERFORMANCE ROAD APPLICATIONS

AVAILBLE FOR GTS-T, GTR, 300ZX, 350Z, WRX & SILVIA

PRICE: $296.00 PER SET (FRONT)

PRICE: $260.00 PER SET (REAR)

DS2500 IS THE LATEST PAD COMPOUND DEVELOPED BY FERODO. IT IS AN EXCELLENT HIGH PERFORMANCE ROAD COMPOUND, AND IS SUITABLE FOR MANY CLUB RACING AND RALLY APPLICATIONS. IT IS EASY TO BED AND OFFERS EXCELLENT BRAKING WITH A HIGH LEVEL OF CONTROLABILITY, AND IS ECONOMICALLY PRICED.

IDEAL FOR HIGH PERFORMANCE ROAD APPLICATIONS

AVAILBLE FOR GTS-T, GTR, 300ZX, 350Z, WRX & SILVIA

PRICE: $260.00 PER SET (FRONT)

PRICE: $170.00 PER SET (REAR)

DS3000 IS USED IN MANY APPLICATIONS WHERE A HIGH FRICTION PAD IS REQUIRED. ALTHOUGH IT HAS ONE OF THE HIGHEST FRICTION COEFFICIENTS, IT REMAINS EASY TO CONTROL DUE TO ITS STABLE COEFFICIENT AT ALL TEMPERATURES. IT IS VERY COMMONLY USED IN WORLD RALLY CARS ON TARMAC STAGES AND IN CIRCUIT RACING.

THESE PADS OFFER REDUCED BEDDING-IN TIME, HIGH FRICTION COEFFICIENT, HIGH INITIAL BITE, AND ARE RELATIVELY EASY ON BRAKE DISCS. TYPICAL USES INCLUDE GT PRODUCTION, WORLD RALLY, NATIONAL RALLY & V8 SUPERCARS.

EXTREME ROAD AND RACE APPLICATIONS ONLY

AVAILBLE FOR GTS-T, GTR, 300ZX, 350Z, WRX & SILVIA

COMES AS A PAIR FOR THE FRONT OR REAR

380 DEGREES MORE STABLE THAN METAL PADS FOR HIGH PERFORMANCE ROAD USE.

AVAILABLE FOR FRONT & REAR

CERAMIC SLOTTED 550 DEGREE PADS. RECOMMENDED FOR HIGH PERFORMANCE STREET & RACE.

AVAILABLE FOR FRONT & REAR

NOTE: PICTURE SHOWS FRONT SET

CARBON CERAMIC. RECOMMENDED FOR RACE. HIGH THERMAL STABILITY, UP TO 700 DEGREES.

AVAILABLE FOR FRONT & REAR

NOTE: PICTURE SHOWS REAR SET

BREMBO GT FRONT BRAKE KIT
SUIT SKYLINE R32, R33 & R34 GTS-T/GTR, 300ZX & S14/S15

355MM CROSS DRILLED OR SLOTTED
OPTION OF RED, BLACK OR SILVER CALIPERS
HATS ARE HARD ANNONDISED IN BLACK
BRAIDED LINES, BREMBO PADS,ANNONDISED ALLOY ADAPTERS, INSTRUCTION BOOK, HIGH TENSILE CAP BOLTS ETC

STOPTECH FRONT KIT - 355x25MM AERO ROTOR (CURVED VANE), 4 PISTON FRONT CALLIPERS
STOPTECH REAR KIT - 355x32MM AERO ROTOR (CURVED VANE), 2 PISTON REAR CALLIPERS

AP RACING 4 PISTON FRONT UPGRADE BRAKE KIT
SUIT SKYLINES, 300ZXs AND SILVIAS

THE KIT CONSISTS OF DBA5000 2-PIECE ROTOR ALLOY HAT 324 X 30MM, FERODO DS2500 PADS AND MOUNTING BRACKETS

PRICE: $2,995.00 FULL KIT

OR $2,595.00 WITH DBA4000 ROTORS