SUPERTECH HIGH PERFORMANCE RACING VALVES

STAINLESS STEEL

5MM OVERSIZE

HIGH FLOW RATES, DURABILITY AND QUALITY

FOR MORE INFO:

WWW.SUPERTECHPERFORMANCE.COM

PRICE: $980/SET

TRUST RB26 OIL PUMP

COMPLETE WITH MOUNTING BRACKETS, ADAPTER WITH THERMOSTAT, DUCTING (SOME MODELS) BRAIDED LINES AND ALLOY FITTINGS

REMOTE FILTER RELOCATION IS AN EXTRA $250

R34 GTR KIT PICTURED

GATES TIMING BELT

• 3 TIMES STRONGER THAN A NORMAL TIMING BELT
• 3 TIMES MORE HEAT RESISTANCE
• 3 TIMES MORE TOOTH STRENGTH THAN FACTORY

INLET AND EXHAUST

R34 GTR SPARK PLUG COVER EMBLEM

SUIT RB26DETT

GENUINE PART

SPLITFIRE DIRECT INGNITION SYSTEM COILS FOR SKYLINE GTR

SUIT RB26DETT

DROP IN REPLACEMENT

GREDDY OVERSIZED PULLEY KIT FOR SKYLINE GTR

GREDDY WATER PUMP, ALT AND POWER STEERING PULLEYS MADE FROM DURALUMIN (A2017) ANNODISED BLUE FOR R32, 33,34 GTR. LESS THAN HALF THE WEIGHT OF FACTORY STEEL ONES FOR IMPROVED THROTTLE RESPONSE. STANDARD SIZE IS $430 SET OF THREE, OR FOR LARGER VERSION HIGH PERFORMANCE RPM ENGINES WITH STRONGER BELTS FOR THE TRACK $495.

ROSS 2 PIECE BILLET TUFFBOND BALANCER FOR RB26DETT

COMPULSARY FOR ALL SUB - 11 SECOND GTR'S

MANUFACTURED FROM BILLET ALLOY Vs FACTORY CAST

WILL NOT FLY APART AT HIGH RPM'S AS CAST FACTORY ONE CAN

WEIGHS 4.1 KG COMPARED TO FACTORY 6.2KG

CAM TIMING MARKS ON UNIT

ANDRA APPROVED

BALANCER PRICE: $590.00

ANNODISED AND AROUND HALF THE WEIGHT OF THE FACTORY ITEM

5% LARGER TO SLOW THE PUMP AT HIGH RPM & PRODUCE
SLIGHT POWER GAIN

TO SUIT R32 & R33 GTR

9.15 LIFT / 260 DEGREE DURATION

TO SUIT RB26DETT

PLEASE EMAIL US TO CORRECTLY MATCH CAMSHAFT SPECS

ACL/ROSS RACING PISTONS

PERFECT FOR HIGH PERFORMANCE ROAD OR RACE USE

THESE PISTONS FEATURE:

• CHAMFERED PORTS AND EDGES
• LOW SILICON CONTENT FOR ADDED STRENGTH
• THICK AND STRONG SKIRTS
• QUALITY GAS NITRIDED STEEL RINGS WITHOUT THE FANCY COATINGS THAT TEND TO WEAR OFF WITH HEAT
• PROVEN RELIABILITY FOR HIGH BOOST AND HIGH HEAT TURBO RACE MOTORS
• EXCEPTIONAL QUALITY

AVAILABLE IN 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED

FULLY MACHINED CROWNS INCLUDE VALVE RECESSES READY TO GO

COMES AS SET OF 6 WITH RINGS

RB26DETT 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED WITH RINGS AND PINS

SET OF CONROD BOLTS FOR NISSAN RB26DETT ENGINE

THESE CONRODS USE ARP 2000 ROD BOLTS

MADE FROM 4340 AIRCRAFT QUALITY MATERIAL.

FULLY PROFILED.

PRECISION SIZED TO TIGHTEST SPECIFICATIONS.

BALANCED TO +/- 1 GRAM AT SCAT.

RATED AT 180HP PLUS PER ROD.

MUCH LIGHTER THAN FACTORY ROD FOR LESS ROTATING MASS SO LESS LAG AND FASTER REVVING

ARGO HEAVY DUTY BILLET CONRODS - INCLUDES ARP ROD BOLTS

ALSO AVAILABLE FOR RB30

IDEAL UPGRADE FOR R32 GTR

OPTION R33 GTR N1 HARMONIC BALANCER

CRANK PRICE: $1,075.00

HARMONIC BALANCER PRICE: $380.00

KIT INCLUDES TANK, CLAMPS AND HOSES

POLISHED TANK. FEATURES AUTOMATIC FEEDBACK OF OIL INTO THE SYSTEM. IDEAL FOR GTR'S RUNNING 1 BAR OR MORE OF BOOST - A MUST FOR TRACK DRIVING

SUIT RB26DETT

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

INCLUDES SANDWICH BLOCK, HOSES, FITTINGS & OIL COOLER

USES 19 ROW -10 OIL COOLER WITH BRAIDED LINES

COMPLETE OIL COOLER KIT.

COMES WITH QUALITY DASH 10 BRAIDED HOSE, ANNODISED ALLOY FITTINGS, BILLET ALLOY SANDWICH PLATE, IN-LINE THERMOSTAT & 16 ROW OIL COOLER.

OPTIONAL OIL FILTER RELOCATION KIT WHICH GIVES THE ABILITY TO RUN THE LARGER Z9 OIL FILTER BASE FOR LARGER SURFACE AREA AND LESS PRESSURE DROP.

BOLT ON FITMENT

NOTE: KIT CAN BE PURCHASED WITHOUT THERMOSTAT OR RELOCATION KIT AT A REDUCED PRICE.

COMPLETE KIT PRICE: $1,295.00

WITHOUT THERMOSTAT : $1,000.00

NO RELOCATION KIT: $1,045.00

HIGHER FLOW AND PRESSURE THAN FACTORY OIL PUMP

NEW N1 WATER PUMP. N1 PUMP HAS ANTI CAVITATION PLATE WITH 6 LARGER BLADES COMPARED TO THE FACTORY 8 BLADE.

THE IMAGE TO THE LEFT SHOWS THE NEW N1 PUMP (TOP) COMPARED TO THE FACTORY PUMP (BOTTOM)

PRICE: $330.00 R33 GTR

PRICE: $380.00 R32 GTR

TOMEI SUMP BAFFLE KIT TO SUIT SKYLINE GTR

SUIT RB26DETT - COMES COMPLETE WITH LID & BOLTS ETC

AVAILABLE IN 500 - 850CC

SUIT RB26DETT

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $195.00 (EACH)

NISSAN SPECIFIC KIT - RISING RATE

SARD SURGE TANKS

WITH DUAL SARD 280 LITER PER MINUTE, 700HP.

EACH FUEL PUMP COMES WITH ANNONDISED ALLOY FITTINGS

MAGNA FUEL REGULATOR

700HP DUAL PORT

ALSO 4 PORT UP TO 1500+ HP

DUAL PORT PRICE: $375.00

4 PORT PRICE: $495.00

BOSCH 044 FUEL PUMP

CAN SUPPORT UP TO 700HP

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

FULL METAL GASKET KIT INCLUDES:

HEAD,EXHAUST & INLET GASKETS

COMPLETE GASKET KIT FOR RB26

1.2MM THICK

UAS UPGRADE RADIATOR FOR SKYLINE R32 GTR

40MM

QUALITY PWR CORE

OPTIONAL TWIN PASS EXTRA $100

UAS UPGRADE RADIATOR FOR SKYLINE R34 GTR

57MM

QUALITY PWR CORE

OPTIONAL TWIN PASS EXTRA $100

UAS UPGRADE RADIATOR FOR SKYLINE R33 GTR

57MM

QUALITY PWR CORE

OPTIONAL TWIN PASS EXTRA $100

UAS UPGRADE RADIATOR FOR SKYLINE R32 & R33 GTR

32MM

(FACTORY UNIT IS 25MM)

SUIT R32 AND R33 GTR ONLY

STOPS AIR GOING OVER THE RADIATOR THUS FORCING MORE AIR THROUGH THE RADIATOR FOR BETTER COOLING

FULL LENGTH PARTITION TO SUIT R32 / R33 & R34 GTR

ENHANCE THE LOOK OF YOUR ENGINE BAY

2 PIECE SILCON PIPING KIT

AVAILABLE IN RED OR BLUE

2 PIECE HIGH PERFORMANCE RADIATOR HOSE KIT

FEATURES ARAMID CONSTRUCTION USING HIGH TEMP MATERIALS

R33 -34 GTR BREATHER HOSES

SILICON REAR HEATER HOSES FOR GTR R32-33-34

PRICE: $240.00

PRICE: $95.00

GREDDY ALUMINIUM RADIATOR HOSE KIT FOR SKYLINE GTR

SUIT R32 & R33 GTR

HEAVY DUTY BLOW OFF VALVE - BOLT ON KIT FOR RB26DETT

INCLUDES CLIPS

INTERNAL TRUMPETS, MACHINED

BOLT ON FITMENT

PRICE: $450.00

PRICE: $350.00