3 POINT FRONT STRUT BRACE FOR INCREASE RIGIDITY

FOR MITSUBISHI EVO 7,8 AND 9

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $225.00 (UR-TW3-394)

2 POINT REAR STRUT BRACE FOR INCREASE RIGIDITY

FOR MITSUBISHI EVO 7,8 AND 9

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $195.00 (UR-RE2-396)

4 POINT FRONT LOWER BRACE FOR INCREASE RIGIDITY

FOR MITSUBISHI EVO 7,8 AND 9

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $225.00 (UR-LA4-310)

4 POINT SIDE LOWER BRACE FOR INCREASE RIGIDITY

FOR MITSUBISHI EVO 7,8 AND 9

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

FOR MORE ULTRA RACING PARTS FOR MITSUBISHI EVOLUTIONS PLEASE CALL US

PRICE: $265.00 (UR-SD4-395)

STOPTECH AERO ROTORS - 2 PIECE 72 CURVED VANE FLOATING - EVOLUTION LANCER FRONT ROTORS

THE STOPTECH AEROROTOR KITS ARE DESIGNED TO REPLACE STANDARD ONE PIECE ROTORS AND WORK WITH THE OE CALIPERS. KITS INCLUDE 2-PIECE DIRECTIONAL FLOATING ROTORS WITH DIRECTIONAL BILLET ALUMINIUM AEROHATS. THE PRE-ASSEMBLED FLOATING 2-PIECE ROTORS ALLOW EXPANSION WITHOUT THE DISC CONING. THE KITS ARE UP TO 3.5KGS LIGHTER THAN STOCK ROTORS AND PUSH UP TO 61% MORE AIR FOR BETTER COOLING AND REDUCED FADE ON THE TRACK.

STOPTECH HAS INCORPORATED SEVERAL DESIGN INNOVATIONS TO IMPROVE ROTOR AIRFLOW, COOLING AND HEAT CAPACITY. THE ABILITY TO ABSORB AND DISSIPATE HEAT IS ESSENTIAL TO BRAKING SYSTEM PERFORMANCE. THE UNIQUELY DESIGNED VANES INSIDE THE DISC OPTIMIZE AIRFLOW THROUGH THE ROTOR. THIS IMPROVED DIRECTIONAL DESIGN MINIMIZES TURBULENCE AND FLOWS MORE AIR THAN ANY OTHER ROTOR TESTED. BETTER AIRFLOW MEANS BETTER COOLING AND LESS FADE.

AEROROTOR® VANE DESIGN OFFERS THE BEST AIRFLOW AND COOLING OF ANY VENTED ROTOR. ALL OF OUR ROTORS ARE HEAT TREATED, PRECISION GROUND, SLOTTED OR DRILLED AND BALANCED AT THE FOUNDRY. THE STOP TECH INTERNAL VANE DESIGN WHICH OFFERS BETTER COOLING AS WELL AS THE IRON FORMULATION IS EXTREMELY RESISTANT TO CRACKING.

AEROHATTM DIRECTIONAL BILLET HATS (SECOND PICTURE ON LEFT) - A RACING FIRST

PRICE: $1,220.00 FRONT PAIR

PROFESSIONALLY PACKAGED CARBON FIBRE BONNET WITH FIBREGLASS UNDERSIDE, PLASTIC MOULDED FRAME AND HIGH GLOSS TOP. NO PAINTING REQUIRED. IMPROVES VENTILATION

SUITABLE FOR EVO 7 TO 9. HIGH QUALITY KIT INCLUDES DUMP PIPE, FRONT PIPE, HEAT WRAP AND GASKETS.

PROFESSIONALLY PACKAGED CARBON FIBRE BONNET WITH FIBREGLASS UNDERSIDE, PLASTIC MOULDED FRAME AND HIGH GLOSS TOP. NO PAINTING REQUIRED. IMPROVES VENTILATION

PROFESSIONALLY PACKAGED CARBON FIBRE BONNET WITH FIBREGLASS UNDERSIDE, PLASTIC MOULDED FRAME AND HIGH GLOSS TOP. NO PAINTING REQUIRED. IMPROVES VENTILATION

LANCER HEADLIGHT SURROUNDS ALSO AVAILABLE.

FRONT BAR PRICE: $595.00

HEADLIGHT SURROUND PRICE: $450.00

UAS  EVO 5 to brake ducting kit, includes plastic and stainless cable ties, hose clamps, 2 inch 1200C ducting adn alloy spiggot and air feed

Complet kit $395

BUDDY CLUB RACING SPEC COILOVER SUSPENSION FOR MITSUBISHI EVO

• DOUBLE HEIGHT ADJUSTMENT
• SPRING PLATFORM AND SHOCK BASE WITH LOCKING RINGS
• 15 WAY ADJUSTABLE DAMPNER
• PILLOWBALL UPPPER MOUNTS
• SUITABLE FOR STREET AND TRACK USE
• DAMPER (FRONT) 10K/H200 (REAR) 10K/H200
• SUIT EVO VIII (CT9A)

NOTE: R33 GTS-T KIT PICTURED

PRICE: $2,500.00 PER SET

(WITHOUT PILLOW BALL MOUNT)

GREDDY SPRINGS (SET OF FOUR)

SUIT LANCER AND FTO
TECH PROGRESSIVE RATE LOWERED

TEIN SPRINGS

TECH PROGRESSIVE RATE LOWERED

SUIT ALL MITSUBISHI

TURBOSMART E-BOOST 2 ELECTRONIC BOOST CONTROLLER

"BOOST + RPM = TOTAL CONTROL"
LOTS OF NEW FEATURES THAT INLUDE: FULLY PROGRAMMABLE AUX OUTPUT CONTROLS WATER SPRAY, METHANOL OR NITRUOS AGAINST BOOST OR RPM; BOOST LEVELS CAN BE MAPPED AGAINST TIME AND RPM; RPM COMPENSATION FEATURE ELIMATES BOOST DROP OFF AT HIGH RPM... CLICK HERE FOR MORE INFORMATION

CAN BE PURCHASED AS A BUNDLE INSTALLED WITH AUTOMETER GAUGE CUP.

E-BOOST 2 PRICE : $795.00

BUNDLE PRICE: $1,120.00

19 X 10 ROW - OIL COOLER ONLY

CAT BACK SYSTEM & ENGINE PIPE. MADE FROM 304 GRADE STAINLESS STEEL MUFFLER USES STAINLESS STEEL WOOL & FIBREGLASS PACKING. SYSTEM INCLUDES STAINLESS FLANGES, HANGER BRACKETS, FLANGE GASKETS, BOLTS ETC.

POLISHED & TIG WELDED

FULL STAINLESS STEEL - STAINLESS PIPE, MUFFLERS, PACKING, FLANGES! FULLY POLISHED 3 INCH MANDREL BENT, 5.5 INCH PURE TITANIUM TIP. 88.2 DB!!!

7 LITRE HIGH FLOW CATALYTIC CONVERTER. AVAILABLE IN 2.5 OR 3 INCH.

PROVIDES 22% INCREASED CLAMP LOAD AND INCLUDES NEW RELEASE BEARING.

FEATURES MODIFIED PIVOT POINT AND DIAPHRAM TO INCREASE CLAMPING PRESSURE BY 40%. ANTI-BURST CASTING (NODULAR IRON), 6 FINGER CENTERED BRONZE CERAMETALLIC CLUTCH PLATE PROVIDES EXCELLENT GRIP. SUITABLE FOR ROAD AND RACE

ORGANIC SPORTS CLUTCH FEATURING 30% INCREASED CLAMP LOAD AND MADE WITH STEEL BACKING FOR STRENGHENED CLUTCH PLATE

PRICE: $495.00 EXCHANGE

PRICE: $695.00 OUTRIGHT

FEATURES REPLACEABLE STEEL FACE - WEIGHS APPROX 5KG

AVAILABLE FOR LANCER EVO III - VIII

CLICK HERE FOR MORE INFORMATION

• MADE FROM AIRCRAFT ALUMINIUM ALLOY
• HARD ANODISED
• KNURLED ENDS FOR QUICK THREADING

AVAILABLE IN 12.5MM X 1.25 OR 12MM X 1.5 THREAD