SUPERTECH HIGH PERFORMANCE RACING VALVES

STAINLESS STEEL

5MM OVERSIZE

HIGH FLOW RATES, DURABILITY AND QUALITY

FOR MORE INFO:

WWW.SUPERTECHPERFORMANCE.COM

PRICE: $950/SET

ACL/ROSS RACING PISTONS

PERFECT FOR HIGH PERFORMANCE ROAD OR RACE USE

THESE PISTONS FEATURE:

• CHAMFERED PORTS AND EDGES
• LOW SILICON CONTENT FOR ADDED STRENGTH
• THICK AND STRONG SKIRTS
• QUALITY GAS NITRIDED STEEL RINGS WITHOUT THE FANCY COATINGS THAT TEND TO WEAR OFF WITH HEAT
• PROVEN RELIABILITY FOR HIGH BOOST AND HIGH HEAT TURBO RACE MOTORS
• EXCEPTIONAL QUALITY

AVAILABLE IN 20 THOU (.5MM) OR 40 THOU (1MM) OVERSIZED

FULLY MACHINED CROWNS INCLUDE VALVE RECESSES READY TO GO

COMES AS SET OF 6 WITH RINGS

RB20, RB25 AND RB30, THOU (.5MM) OR 40 THOU (1MM) OVERSIZED WITH RINGS AND PINS

ANNONDISED RED, BLUE OR GOLD BILLET ALLOY. CNC MACHINED RAIL WITH SIEMENS INJECTORS 480CC, 600CC OR 720CC WITH ALL BOLTS, FITTINGS ETC

PICS SHOWS SAMPLE OF RAILS ONLY

THESE CONRODS USE ARP 2000 ROD BOLTS

MADE FROM 4340 AIRCRAFT QUALITY MATERIAL.

FULLY PROFILED.

PRECISION SIZED TO TIGHTEST SPECIFICATIONS.

BALANCED TO +/- 1 GRAM AT SCAT.

RATED AT 180HP PLUS PER ROD.

MUCH LIGHTER THAN FACTORY ROD FOR LESS ROTATING MASS SO LESS LAG AND FASTER REVVING

ARGO HEAVY DUTY BILLET CONRODS - INCLUDES ARP ROD BOLTS

ALSO AVAILABLE FOR RB30

UAS PLAZMAMAN RB25 CUSTOM PLENUM & INTERCOOLER KIT

THIS PLENUM USES THE FACTORY THROTTLE BODY BUT INCLUDES A FLANGE TO SUIT UP TO 80MM.

COMPLETE BOLT ON KIT ALSO AVAILABLE INCLUDING LARGE FRONT MOUNT INTERCOOLER, PLENUM, ALL NESSESARY FITTINGS, INSTRUCTIONS, THROTTLE BODY GASKET AND INTERCOOLER PIPING.

THE INTERCOOLER FEATURES A CORE SIZE OF 680 X 340 X 80MM WITH SWEPT BACK END TANKS AND 70MM OUTLETS. THIS INTERCOOLER IS RATED UP TO 900HP YET WORKS VERY WELL WITH THE STANDARD TURBOCHARGER.

COMPARED TO OTHER JAPANESE MADE PRODUCTS, THESE PLENUMS FLOW COOLER AND MORE EVEN INTO EACH RUNNER, WITH LESS PRESSURE DROP.

PLENUM PIPES AND INTERCOOLER END TANKS ARE MIRROR POLISHED

OPTIONAL PLUMB BACK PIPE WITH HOSE CLAMPS, SILICON HOSE AND INTAKE PIPE.

DYNO SHEET BELOW SHOWS RESULTS OF THIS PLAZMAMAN PLENUM & INTERCOOLER KIT FITTED TO A SKYLINE R33 GTS-T WITH STANDARD TURBO, STANDARD ECU (WITH FUEL CUT DEFENDER), STANDARD ENGINE INTERNALS, ADJUSTABLE EXHAUST CAM GEAR, RAM POD AND FULL 3" EXHAUST SYSTEM.

PLENUM ONLY PRICE: $1,150.00

FULL KIT PRICE: $3,200.00

PLUMB BACK PIPE PRICE: $395.00

Easy bolt on item, it eliminates all those ugly water lines and wiring that sit on top of the motor near the fire wall, and gives the engine bay a clean look.

The NEO throttle bodies are big huge ugly items and therefore cannot be reused due to their physical size. There are 2 types of throttle bodies that can be utilized for these:

• R33 RB25T throttle body (requires new cable),
• Can be supplied with one of our custom 70mm race spec items (soon to be released).

PRICE: $1,195.00

PRICE: $990.00 WHILE STOCK LAST

THIS PLENUM USES THE FACTORY THROTTLE BODY BUT INCLUDES A FLANGE TO SUIT UP TO 80MM.

COMPLETE BOLT ON KIT INCLUDING PLENUM, ALL NESSESARY FITTINGS, INSTRUCTIONS, THROTTLE BODY GASKET ETC.

COMPARED TO OTHER JAPANESE MADE PRODUCTS, THESE PLENUMS FLOW COOLER AND MORE EVEN INTO EACH RUNNER, WITH LESS PRESSURE DROP.

PLENUM PIPES ARE MIRROR POLISHED

PRICE: $1,150.00

AVAILABLE FOR R32 & R33 GTS-T AND R34 GTT

PRICE: $145.00 EACH (EXCHANGE)

NEW GTR N1 WATER PUMP. N1 PUMP HAS ANTI CAVITATION PLATE WITH 6 LARGER BLADES COMPARED TO THE FACTORY 8 BLADE.

THE IMAGE TO THE LEFT SHOWS THE NEW N1 PUMP (TOP) COMPARED TO THE FACTORY PUMP (BOTTOM)

PRICE: $330.00 R33 GTS-T

PRICE: $380.00 R32 GTS-T

PROVIDES HIGHER FLOW AND PRESSURE THAN FACTORY OIL PUMP

WE RECOMMEND ALSO USING A HIGH VOLUME SUMP.

HIGH ENERGY PERFORMANCE SUMPS

AVAILABLE TO SUIT DRAG AND CIRCUIT/DRIFT USAGE.

PRO DRAG LARGER CAPACITY SUMP

PRO DRAG SUMP WITH 8.5 LITRE CAPACITY. ALSO FEATURES HORIZONTAL TRAP DOOR, WINDAGE TRAY AND MODIFIED PICKUP.
SUITABLE FOR R32 AND R33 GTS-T RWD

PRO CIRCUIT LARGER CAPACITY SUMP

PRO CIRCUIT SUMP WITH 8.5 LITRE CAPACITY, MODIFIED PICKUP, SUMP BAFFLES AND SWINGING TRAP DOORS TO ELIMINATE OIL STARVATION AND SURGE. INCLUDES WINDAGE TRAY. SUITABLE FOR R32 & R33 GTS-T RWD

PRO DRAG PRICE: $895.00 EXCHANGE

PRO CIRCUIT PRICE: $965.00 EXCHANGE

PRO CIRCUIT SUMP WITH 7 LITRE CAPACITY, MODIFIED PICKUP, SUMP BAFFLES AND SWINGING DIAMOND SHAPED TRAP DOORS TO ELIMINATE OIL STARVATION. INCLUDES WINDAGE TRAY TO SUIT R32 & R33 GTS-T

INCLUDES SANDWICH BLOCK, HOSES, FITTINGS & OIL COOLER

USES 19 ROW -10 OIL COOLER WITH BRAIDED LINES

19 X 10 ROW - OIL COOLER ONLY

NISMO OIL FILTER

FEATURES:

• 21% LESS PRESSURE LOSS
• 24% INCREASE IN FILTRATION
• 10% LESS FLOW RESISTANCE
• 37% INCREASED LIFE

COMPLETE OIL COOLER KIT.

COMES WITH QUALITY DASH 10 BRAIDED HOSE, ANNODISED ALLOY FITTINGS, BILLET ALLOY SANDWICH PLATE, IN-LINE THERMOSTAT & 16 ROW OIL COOLER.

OPTIONAL OIL FILTER RELOCATION KIT WHICH GIVES THE ABILITY TO RUN THE LARGER Z9 OIL FILTER BASE FOR LARGER SURFACE AREA AND LESS PRESSURE DROP.

BOLT ON FITMENT

NOTE: KIT CAN BE PURCHASED WITHOUT THERMOSTAT OR RELOCATION KIT AT A REDUCED PRICE.

COMPLETE KIT PRICE: $1,295.00

WITHOUT THERMOSTAT : $1,000.00

NO RELOCATION KIT: $1,045.00

VENTS FROM UNDERNEATH - INCLUDES DRAIN PLUG

GREDDY OIL CATCH TANK

KIT INCLUDES TANK, CLAMPS AND HOSES. KITS AVAILABLE TO SUIT N/A & TURBOCHARGED VEHICLES

COMPLETE GASKET KIT FOR RB20 & RB25

1.2MM THICK

1.2MM THICK

STANDARD SIZE ALLOY RADIATOR WITH PLASTIC END TANKS AND EARTH STRAP

SUIT R32 AND R33 GTS-T

FEATURES 32MM CORE IN COPPER AND BRASS.

THE FACTORY VERSION IS 25MM THICK WITH PLASTIC END TANKS

KOYO TOP AND BOTTOM TANKS - ADRAD CORE

2 YEAR WARRANTY

• 42MM SINGLE CORE
• 55MM TWIN CORE

• 50MM CORE

40MM

QUALITY PWR CORE

2 PIECE SILCON PIPING KIT

AVAILABLE IN RED OR BLUE

2 PIECE SILCON PIPING KIT

AVAILABLE IN RED OR BLUE

2 PIECE HIGH PERFORMANCE RADIATOR HOSE KIT

FEATURES ARAMID CONSTRUCTION USING HIGH TEMP MATERIALS

AVAILABLE IN TITANIUM, SILVER AND BLACK COLOURS

QUALITY AIR GUIDE DESIGNED TO PUSH MORE AIR THROUGH THE RADIATOR TO IMPROVE COOLING.

GATES TIMING BELT - RACING

• 3 TIMES STRONGER THAN A NORMAL TIMING BELT
• 3 TIMES MORE HEAT RESISTANCE
• 3 TIMES MORE TOOTH STRENGTH THAN FACTORY

SPLITFIRE DIRECT INGNITION SYSTEM COILS FOR SKYLINE GTS-T

SUIT RB25DET AND RB20DET

DROP IN REPLACEMENT

TO SUIT RB25DET

PLEASE EMAIL US TO CORRECTLY MATCH CAMSHAFT SPECS

TO SUIT R32 & R33 GTS-T

8.5 LIFT / 256 DEGREE DURATION

SUITABLE FOR RB20 & RB25

INLET AND EXHAUST

GREDDY OVERSIZED PULLEY KIT FOR NISSAN SKYLINE R32 GTS-T (RB20)

GREDDY WATER PUMP, ALT AND POWER STEERING PULLEYS MADE FROM DURALUMIN (A2017) ANNODISED BLUE. LESS THAN HALF THE WEIGHT OF FACTORY STEEL ONES FOR IMPROVED THROTTLE RESPONSE.

ROSS 2 PIECE BILLET TUFFBOND BALANCER FOR RB20/RB25

MANUFACTURED FROM BILLET ALLOY Vs FACTORY CAST

WILL NOT FLY APART AT HIGH RPM'S AS CAST FACTORY ONE CAN

WEIGHS 4.1 KG COMPARED TO FACTORY 6.2KG

CAM TIMING MARKS ON UNIT

ANDRA APPROVED

BALANCER PRICE: $590.00

NISMO ENGINE MOUNTS

SUIT  R32, R33 and R34 GTST and GTT

PRICE: $150.00 EACH FOR R32

PRICE: $250.00 EACH FOR R33 & R34

255 LITRES PER HOUR, IN TANK FUEL PUMP WITH FITTING KIT

NISSAN SPECIFIC KIT

AVAILABLE IN 500 - 850CC

SUIT RB20DET & RB25DET

NOTE: SIDE FEED INJECTORS PICTURED

INCLUDES COLLARS, SEALS & 0-RINGS READY TO FIT

PRICE: $230.00 (EACH)

NISMO FUEL INJECTORS FOR SKYLINE GTS-T

AVAILABLE IN 555 OR 740CC

TRUST TYPE R BLOW OFF VALVE

HEAVY DUTY BLOW OFF VALVE

SUITABLE FOR FITTING TO R33 GTS-T

AVAILABLE IN ALLOY, MILD STEEL OR STAINLESS

ALLOY PRICE: $45.00

MILD STEEL PRICE: $35.00

STAINLESS PRICE: $55.00

NEW NISSAN CRANK ANGLE SENSOR

SUITS R32 & R33 SKYLINE MODELS

PRICE: $450.00