ULTRA RACING front lower bars for R32

FOUR POINT CONNECTION(UR-LA4-478) AND TWO POINT ADJUSTABLE (UR-LA2-479A)

REFER TO LINK FOR MORE INFORMATION ON ULTRA RACING PRODUCTS INLC. TESTS AND FACTS AT

http://www.ultraracing.com.my/ultraracing/Tech_information.asp

PRICE:  $234.00 (UR-LA4-478)

             $198.00 (UR-LA2-479A)

6 POINT MIDDLE BRACE (UR-ML6-480), 3 POINT REAR BRACE (UR-RLS6-481P), REAR ANTI ROLL BAR 23mm (UR-AR23-141)

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $273.00 (UR-ML6-480)

            $244 (UR-RLS6-481P)

            $314 (UR-AR23-141)

3 POINT FRONT FENDER BRACES

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $223.00 (UR-FD3-482)

FRONT ANTI ROLL BAR 25mm

FOR MORE INFORMATION ON ULTRA RACING PRODUCTS REFER TO LINK BELOW:

http://www.ultraracingaustralia.com/page6.htm

PRICE: $314.00 (UR-AR23-140)

ULTRA RACING Front Sway Bar

Front Sway bar for reduction of body roll 32mm 2 point brace

For NISSAN SKYLINE R33/R34 GTS-T & GTT

REFER TO LINK FOR MORE INFORMATION ON ULTRA RACING PRODUCTS INLC. TESTS AND FACTS AT

http://www.ultraracing.com.my/ultraracing/Tech_information.asp

PRICE:  $423.00 (UR-AR29-059)

ULTRA RACING Rear Sway Bar

Rear Sway bar for reduction of body roll 25mm 2 point brace

For NISSAN SKYLINE R33/R34 GTS-T & GTT

REFER TO LINK FOR MORE INFORMATION ON ULTRA RACING PRODUCTS INLC. TESTS AND FACTS AT

http://www.ultraracing.com.my/ultraracing/Tech_information.asp

PRICE:  $374.00 (UR-AR23-060)

   Nismo top front upper bushes

• 8 required to do left and right, inner and outter

AVAILABLE TO SUIT SKYLINE R32 & R33 GTS-T.

AVAILABLE FOR FRONT AND REAR

NON-ADJUSTABLE ADJUSTABLE

GREDDY PERFORMANCE DAMPER TYPE-S, FOR R32/33/34/35

• 32 LEVEL DAMPING FORCE (COMPRESSION & REBOUND TOGETHER)
• MONOTUBE STRUCTURE
• ADJUSTABLE PILLOW BALL UPPER MOUNTS
• REINFORCED RUBBER UPPER MOUNTS
• ALUMINIUM BRACKETS
• DURABLE LIGHTWEIGHT SPRINGS
• EXTENDED CONTROL CABLE
  (R33GTR PICTURED)

BUDDY CLUB RACING SPEC COILOVER SUSPENSION FOR SKYLINE GTS-T

• DOUBLE HEIGHT ADJUSTMENT
• SPRING PLATFORM AND SHOCK BASE WITH LOCKING RINGS
• 15 WAY ADJUSTABLE DAMPNER
• PILLOWBALL UPPPER MOUNTS
• SUITABLE FOR STREET AND TRACK USE
• DAMPER (FRONT) 10K/H200 (REAR) 8K/H240
• SUITABLE FOR ECR33 AND ER34 ONLY

NOTE: R33 GTS-T KIT PICTURED

BUDDY CLUB RACING SPEC COILOVER SUSPENSION FOR SKYLINE GTS-T

• DOUBLE HEIGHT ADJUSTMENT
• SPRING PLATFORM AND SHOCK BASE WITH LOCKING RINGS
• 15 WAY ADJUSTABLE DAMPNER
• PILLOWBALL UPPPER MOUNTS
• SUITABLE FOR STREET AND TRACK USE
• DAMPER (FRONT) 8K/H200 (REAR) 6K/H240
• SUITABLE FOR HCR32 ONLY

NOTE: R33 GTS-T KIT PICTURED

TEIN SUPER STREET COILOVERS FOR NISSAN SKYLINE R32, R33 & R34 GTS-T

• 16 LEVELS OF DAMPENING FORCE ADJUSTMENT
• ADJUSTABLE RIDE HEIGHT
• IDEAL FOR STREET AND RACE USE
• HIGH PERFORMANCE AND EXTREMELY COST EFFECTIVE
• REBUILDABLE DAMPER FOR REPAIR/OVERHAUL OR REVALVING
• EXCLUSIVELY DESIGNED FOR AUSTRALIAN APPLICATIONS

THE ULTIMATE IN PERFORMANCE SUSPENSION WITH THE ABILITY TO RAISE OR LOWER THE CARS RIDE HEIGHT. IDEAL FOR TRACK USE. NEW FLEX HA MODEL FEATURES MULTI ADJUSTABLE SHOCKS WITH ADJUSTABLE HEIGHT & PILLOW BALL TOPS

SPRING RATE:

F: 65MM (DIAMETER) 8.0KG/200MM
R: 65MM (DIAMETER) 7.0KG/250MM

LOWERING RANGE:

F: -25 ~ -85MM
R: +1 ~ -59MM

GREDDY SPRINGS (SET OF FOUR)

TECH PROGRESSIVE RATE LOWERED
SUIT ALL SKYLINE

TEIN SPRINGS

TECH PROGRESSIVE RATE LOWERED

SUIT ALL SKYLINE

WHITELINE LOWERED SPRINGS FOR NISSAN SKYLINE GTS-T

SUIT R32 AND R33 GTS-T

WHITELINE LOWERED SPRINGS FOR NISSAN SKYLINE R34 GTT

SUIT R34 GTT

TEIN ADJUSTABLE PILLOW BALL TENSION RODS

ADJUSTABLE PILLOW BALL TENSION RODS

AVAILABLE FOR R32 & R33 GTS-T R34 GTT

ADJUSTABLE RADIUS RODS FOR NISSAN SKYLINE R32 GTS-4

ADJUSTABLE RADIUS RODS FOR NISSAN SKYLINE GTS-T

SUITABLE FOR SKYLINE R32 & R33 GTS-T AND R34 GTT

TUNE AGENT ALLOY ADJUSTABLE RADIUS RODS

WITH 3 PIECE ROD ENDS

UAS FRONT OR REAR STEERING ROD FOR SKYLINE R32 GTS-T

FACTORY LENGTH - $65 EACH
10 OR 20MM LONGER THAN FACTORY - $95 EACH

UAS REAR UPPER LEADING CONTROL ARMS FOR SKYLINE GTS-T

REAR UPPER LEADING CONTROL ARMS FOR ADJUSTABLE TOE ANGLE. ESSENTIAL FOR CARS THAT ARE LOWERED OR HAVE INCREASED TIRE DIAMETER.

REDUCES TIRE WEAR AND IMPROVES TRACTION AND STABILITY, AND PREVENTS PLAY IN THE REAR SUSPENSION

SPHERICAL BEARINGS HAVE RUBBER PROTECTIVE BOOTS FOR BETTER WEATHER RESISTANCE AND SUPERIOR BEARING LIFE.

UAS BALL BEARING ADJUSTABLE TOP CONTROL ARMS FOR R32 GTS-T

ALSO SUITABLE FOR R32 GTS-4

UAS RECOMMENDS THESE ARE USED WITH SOLID BEARING TYPE FRONT CASTOR RODS TO PREVENT CASTER PLAY. OTHERWISE BEARING MAY EXPERIENCE EXCESSIVE WEAR.

UAS FRONT UPPER ADJUSTABLE CONTROL ARMS FOR R32 GTS-T

6 ALLEN KEY BOLTS FOR ADJUSTMENT, USES URETHANE BUSHES WITH GREASE NIPPLES FOR LUBRICATION. INCLUDES ASSEMBLY GREASE. 4MM PLATE CONSTRUCTION

FOR MORE OR LESS CAMBER

FRONT OR REAR

ADJUSTABLE URETHANE BUSH WITH OFFSET CAMBER PIN. THE BOLTS HAVE A PLINE TO ADJUST IN CAR. CAN BE USED FOR INNER AND OUTER TO GIVE AROUND 2.5 DEGREES OF ADJUSTMENT, OR 1 DEGREE IF ONLY PAIR IS USED.

REPLACEMENT BUSHES WITH OFFSET CAMBER PINS OFFERING 1 DEGREE OF CAMBER ADJUSTMENT

OPTIONAL GREASE NIPPLE EXTRA $12 A PAIR

STIFFER AND STRONGER THAN FACTORY ITEMS. AVAILABLE TO SUIT MOST NISSANS

TO SUIT R33 GTS-T

UPPER OUTER FRONT CONTROL ARM CAMBER PINS PROVIDING 0.6 DEGREES OF CAMBER ADJUSTMENT

URETHANE BUSHES TO REPLACE THE FACTORY SILICON FILLED UNITS THAT TEAR & CRACK OVER TIME.

COMES AS A SET

COMES AS A SET OF 4 BUSHES. REPLACED FACTORY BUSHES WHICH ARE TOO SOFT FOR HIGH HP OR TRACK CARS.

UAS URETHANE DIFF MOUNTING BUSHES FOR SKYLINE GTS-T

REPLACES WORN FACTORY RUBBER BUSHES.

IMPROVES HANDLING AND REDUCES AXLE TRAMP

SUIT R32 AND R33 GTS-T

URETHANE BUSHES TO REPLACE THE FACTORY SILICON FILLED UNITS THAT TEAR & CRACK OVER TIME.

COMES WITH SLEAVE FOR EASY INSERTION INTO RADIUS ROD. INCLUDES NUTS/BOLTS, GREASE & NOTCHES FOR EASY ADJUSTMENT

USED TO PREVENT EXCESSIVE MOVEMENT IN THE REAR OF THE VEHICLE CAUSED BY HIGHER POWER ENGINES & EXTREME DRIVING. IMPROVES HANDLING

BEE R PINAPPLE BUSHES

BEE*R PINEAPPLE BUSHES - THE ORIGINAL!

HIGH QUALITY URETHANE WITH MOLDED IN GROOVE FOR TIE WARE FOR SUPERIOR SEATING OF THE BUSH

ADDING THESE BUSHES TO THE REAR SUSPENSION CRADLE IN ANY RWD NISSAN (AS WELL AS GTR'S) FROM 1988-2002 REDUCES CRADLE MOVEMENT DRAMATICALLY TO GIVE A MORE CONSISTENT, PREDICTABLE FEEL TO THE REAR END, WHICH IS ESPECIALLY VALUABLE FOR DRIFTING.

BY ALTERING THE STATIC ANGLE OF THE CRADLE, PINEAPPLE BUSHES ALSO PROMOTE REAR SUSPENSION SQUAT FOR GREATER REAR GRIP.

PRICE : $99.00 PER SET

FIRMS UP THE REAR OF THE VEHICLE TO IMPROVE HANDLING.

EASY INSTALLATION

SUIT R33

FRONT SWAY BAR 24MM $235
SPHERICAL BEARING ADJUSTABLE LENGTH $150

REAR SWAY BAR 20MM ADJUSTABLE $260
REAR SWAY BAR 22MM NON-ADJUSTABLE $260
SPHERICAL BEARING ADJUSTABLE LINKS $189

PRICES AS PER DESCRIPTION

OFFERS 1 DEGREE OF ADJUSTMENT

SET OF 4

TIG WELDED CHROME MOLLY STEEL. VERY STRONG AND VERY LIGHT AT AROUND 850 GRAMS.

REMOVE YOUR EXISTING HEAVY TROUBLESOM FACTORY HYDRAULIC OR ELECTRIC REAR STEERING RACK.

AVAILABLE FOR FRONT ONLY FOR R33 GTS-T OR FRONT & REAR FOR R32 GTS-T

QUALITY FRONT STRUT BRACE BY JIC

QUALITY FRONT STRUT BRACE BY JIC

POLISHED

• MADE FROM AIRCRAFT ALUMINIUM ALLOY
• HARD ANODISED
• KNURLED ENDS FOR QUICK THREADING

AVAILABLE IN 12.5MM X 1.25 OR 12MM X 1.5 THREAD